Menu Close

Why is My Bosch Stove Top Not Working?

Bosch oven and stove affordable repair Durban , phoenix

Check the Gas Burner for Blockages.  

Bosch repairs 


The first step to take when troubleshooting your Bosch stove top is to check if there’s something blocking the gas burner. This issue is especially common and can be easily resolved. Ensure that any debris or built-up grease are cleared and that no utensils are preventing the valve from opening properly. If this doesn’t work, move onto the next step!

Verify that all the Connections are Intact.

Next, you’ll want to verify that all the connections are intact and secured. Check the gas line connection to the stove, as well as the regulator, burner tube and igniter. Coils should make a tight connection with their terminals when removed and firmly press down into place when reinstalled. If all of these components seem secure then move onto the next troubleshooting step!

Examine the Burner Control Knobs.

The control knobs on your Bosch stove are likely plastic and can crack, resulting in not being able to turn properly or perhaps not turning at all. Examine all of your knobs by removing them, taking special attention to any cracks or damage. If they appear faulty, you may need to replace them completely so that the stove functions properly. Be sure to reference your user manual for proper installation instructions when replacing these parts! 

Test Whether the Igniter is Working Properly.

The igniter on your Bosch stove should always be in good working condition. To test the igniter, switch it to “on” and use a voltmeter to see whether or not you’re getting electricity. If the voltage is too low, then the igniter may need to be replaced. Make sure all of your wiring is correct as well before attempting this repair. Once everything is properly connected, try turning on your stove again and inspecting the igniter for sparks—this will help you determine if it’s working properly. Is your bosch electric stove top not working? 

Perform Any Necessary Cleaning and Troubleshooting of the Electric Spark Module.

The electric spark module, part of your stove’s igniter system, should be clean and free of debris and deposits. If it is not, this can interfere with its proper functioning. If the spark module needs to be cleaned, unplug the stove and use a damp cloth or brush to remove any dirt or grime. Additionally, use a voltmeter to test that the voltage in the modul

Bosch hob problems? Book a repair now -

Bosch Electric Hob Troubleshooting - Authorized Service Centre

Bosch Electric Hob Troubleshooting

Bosch electric hob not working

If your Bosch electric hob is not working properly, follow these steps to troubleshoot the issue:

1. Check Power Supply

Make sure the hob is properly connected to the power supply and that the power outlet is functioning. Try plugging in another appliance to verify.

2. Reset the Hob

Reset the hob by turning off the power at the mains for a few minutes, then turn it back on. This can sometimes resolve minor issues.

3. Check Circuit Breaker

Inspect the circuit breaker or fuse box to ensure the circuit that the hob is connected to has not tripped or blown a fuse. If it has, reset the breaker or replace the fuse.

4. Verify Controls

Check that the hob controls are set correctly. Ensure that the correct cooking zone is selected and that the desired temperature setting is chosen.

5. Safety Features

Verify if any safety features such as child lock or overheating protection are activated. Refer to the user manual for instructions on how to deactivate these features.

6. Contact Support

If the hob still does not work after following these steps, contact Bosch customer support for further assistance. Provide them with the model number and any relevant information about the issue.

Note: Attempting to troubleshoot or repair electrical appliances yourself may be dangerous. If you are unsure or uncomfortable with any step, contact a qualified electrician or Bosch service technician.

Leave a Reply

Your email address will not be published. Required fields are marked *