If you’re having trouble finding where the leak is coming from, try using a flashlight to shine light into the bottom of the machine. Look for any dark spots or areas that appear wet. These are likely the source of the leak.

First, check the drain hose. It should be connected to the drain pump. If it’s damaged, you’ll need to purchase a new one. Next, check the drain pump itself. If it has any cracks or damage, you’ll need to buy a new one as well. Finally, check the drain pump motor. If it’s damaged or worn out, you’ll need to order a replacement part.

Once you find the leak, turn off the water supply at the main shutoff valve. Then, remove the access panel cover (if there is one) and locate the water valve. Remove the screw holding the valve in place and then unscrew the valve itself. This will allow you to see inside the valve.

If you’re lucky, you’ll only need to replace the rubber gasket. Otherwise, you’ll need to replace the entire door panel.

Now that you’ve checked the parts, it’s time to replace them. Start by removing the bottom panel of the dishwasher. Then remove the screws holding the top cover in place. Remove the two screws holding the door in place. Lift up the door and pull it off. Remove the three screws holding the back panel in place. Pull the panel off. Remove the four screws holding the front panel in place. Pull it off. Remove the six screws holding the filter assembly in place. Pull the filter assembly out. Remove the five screws holding the drain pump in place. Pull the pump out. Remove the two screws securing the drain hose to the pump. Unscrew the hose from the pump. Remove the two screws attaching the drain hose to the dishwasher. Pull the hose out. Remove the two bolts holding the drain pipe in place.